MATERIAL & APPLICATION RANGE 

UNIVERSAL series - DIAMOND CORE DRILLS

Below in alphabetical order is a list of Applications & Materials SMART CUT™ - Sintered (metal bond) UNIVERSAL APPLICATION series diamond core drills have been used on. This is not a complete list and designed for example purposes only. This information is designed to help you better understand the range of Materials universal application series diamond core drills may be implemented. 

Please note the following factors will vary, depending on type of material being drilled, material hardness, density, & drilling depth:

DIAMOND MESH / GRIT SIZE:

Diamond Drills 7/8" diameter and below are 

Diamond Mesh/Grit Size: 70/80 ANSI* 

Diamond Drills 1" and above are 

Diamond Mesh/Grit Size: 40/60 ANSI* 

* Note: ANSI - American National Standards Institute (USA standards)

This is typically considered a coarse diamond mesh size. This is designed to provide fast drilling performance for a large variety of ultra hard to soft materials. Depending on your surface finish quality requirements for some applications such as optical glass, pyrex, silicon wafers & other similar materials this could be to coarse. Finer diamond mesh size diamond core drills could be produced in these cases to meet your specific requirements. Further information is available on understanding diamond mesh/grit size and Diamond Drill Life & Performance is available below.

MATERIALS & APPLICATIONS USED ON:

                A                                                     I

Material Hardness + Density + Drilling Depth + Material Shape/Geometry + RPM's + Feed Rate + Coolant Used + Drilling Equipment Type/Condition + Material Holding Method + Operator Experience 

=  DIAMOND DRILL LIFE & OVERALL PERFORMANCE