THIN WALL Electroplated Diamond Core Drills

Thin Wall Multi-Layered Electroplated Diamond Core Drills, Manufactured by UKAM Industrial are Multi Layered. They have 3 layers of diamonds, not just 1 layer of diamonds like conventional electroplated drills. This provides longer drilling life, smoother surface finish, faster and freer drilling action, & more consistent performance. Recommended for drilling full range of glass, quartz, optical materials, composites, soft to medium hard natural and semi-precious stone, as well as softer Advanced Materials. It is highly recommended that these diamond drills be used with water swivel adapter Model 5811, 5811S or 58MF to run high pressure of coolant through center of drill.

FEATURES:

have 5/8"-11" female thread
Drills can be used with 3/8", 1/2", and 1/2" Gas Shank Adapters placed into drilling equipment chuck
Works with all popular Drilling Equipment
LONG LASTING. Drilling Life: 350+ holes*. Drill life will vary
FAST DRILLING. Drilling Speed: 1 to 2 inches per minute.
SMART CUT™ technology

ADVANTAGES:

less loss of material
minimum material deformation
less heat generation
faster drilling speed
less chipping
better surface finish quality

Bond Close Up

Tolerances:

Outside Diameter (D): + / - 0.060mm

Inside Diameter (D1): + / - 0.060mm

Drill Run out: 0.04mm (.00157")

HEIGHTS:

H = Total Drill Length: 3.375" (85.72mm) accept for 1/8" (3.2mm) & 3/16" (4.76mm)

H1 = Diamond Depth (diamond height): .20”(5.0mm)

H2 = Drilling Depth (how deep you can drill): 2.15" (54.61mm) accept for 1/8", 3/16"

TH = Drill Tube Wall Thickness: 0.55-0.65mm (.021" to .0255") accept 1/8", 3/16"

USED ON:

- Drill Press

- Hand Held Drills

- Angle Grinders

- CNC/Milling Machines

- Other Equipment will applicable speed

APPLICATION: (materials used on)

SMART CUT™ series Thin Wall Electroplated Diamond Core Drills provide the best and chip free performance on materials 4 to 7 on Mohe's Scale of Hardness. Materials such as: Glass, Quartz, Yag, Optical Materials, Marble, Onyx, Soft to Medium Hard, Natural & Semi-Precious Stone, Composites, Soft to Medium Hard Technical Ceramics & many other materials.

video explanation (2.00MB)

Diamond drill above shown with water swivel adapter Model 5811. Used to run high pressure of coolant through center of drill.

How to Order - Terms/Conditions - Basket Contents - Check Out

Item #	Outside Diameter (D1)	Drilling Depth (H2)	Recommended RPM	Price	Add to Basket	PURCHASE
5EDC1800SG	1/8" (3.18mm)	1.30"	2,500	$43.74	Add to Basket	BUY ONE NOW
5EDC3160SG	3/16" (4.76mm)	2.15"	2,250	$43.74	Add to Basket	BUY ONE NOW
5EDC1400SG	1/4" (6.35mm)	2.15"	2,000	$43.74	Add to Basket	BUY ONE NOW
5EDC5160SG	5/16" (7.94mm)	2.15"	1,500	$44.18	Add to Basket	BUY ONE NOW
5EDC3800SG	3/8" (9.52mm)	2.15"	1,250	$45.44	Add to Basket	BUY ONE NOW
5EDC7160SG	7/16" (11.11mm)	2.15"	1,150	$49.82	Add to Basket	BUY ONE NOW
5EDC1200SG	1/2" (12.7mm)	2.15"	950	$52.98	Add to Basket	BUY ONE NOW
5EDC5800SG	5/8" (15.87mm)	2.15"	875	$60.52	Add to Basket	BUY ONE NOW
5EDC1180SG	1-1/8" (28.57mm)	2.15"	750	$96.82	Add to Basket	BUY ONE NOW
5EDC1140SG	1-1/4" (31.75mm)	2.15"	650	$98.32	Add to Basket	BUY ONE NOW
5EDC1120SG	1-1/2" (38.10mm)	2.15"	550	$109.86	Add to Basket	BUY ONE NOW
5EDC1580SG	1-5/8" (41.27mm)	2.15"	575	$117.21	Add to Basket	BUY ONE NOW
5EDC1340SG	1-3/4" (44.45mm)	2.15"	550	$125.87	Add to Basket	BUY ONE NOW
5EDC2000SG	2.00" (50.80mm)	2.15"	525	$129.33	Add to Basket	BUY ONE NOW
5EDC2140SG	2-1/4" (57.15mm)	2.15"	500	$138.91	Add to Basket	BUY ONE NOW
5EDC2120SG	2-1/2" (63.50mm)	2.15"	475	$148.25	Add to Basket	BUY ONE NOW
5EDC3000SG	3.00" (76.20mm)	2.15"	450	$159.81	Add to Basket	BUY ONE NOW

Other Sizes, Drilling Depths & Specifications are available upon request

SHANK ADAPTERS (used to place diamond drill into drilling equipment chuck)

video explanation (1.50MB)

Shank Adapters can be ordered individually (without diamond drills). Shank adapters have 5/8-11" male thread, and can be threaded into diamond drill 5/8-11" female thread/collet. Shank adapter will fit into chuck of any drilling equipment. Drills may be used with or without shank adapter or water swivel.

3/8" Shank Adopter

$22.46

Add to Basket - BUY ONE NOW

1/2" Shank Adopter

$22.46

Add to Basket - BUY ONE NOW

1/2" Gas Male Shank Adopter

$26.72

Add to Basket - BUY ONE NOW

RECOMMENDED WATER SWIVEL ADAPTERS (for use with Thin Wall Electroplated Diamond Core Drills)

FEATURES:

Heavy Duty
Stainless Steel
2 Bearings
Adjustable Water Flow
Precision Crafted

BENEFITS:

Increase Drill Life
Minimize Material Stress & Deformation
Consistent Performance
Improve Drill Concentricity (run out)
Save Time
Save Money

UKAM Industrial Superhard Tools manufactures water swivel adapters to be used with just about any type of drilling equipment. Such as: drill press, hand held drills, angle grinders, CNC/Milling Machines, and other equipment. Water Swivel Adapters below are recommended specifically for use with diamond core drills above. more >>>

Model 5811

Water Swivel Adopter - Model 5811
Premium (Professional Quality)
Item # AF4412GW $139.81
Thread: 5/8-11" male Shank: 1/2"
USED ON: Drill Press, CNC Machine

Add to Basket - BUY ONE NOW

Model 5811S

video explanation (2.00MB)

Water Swivel Adopter Model 5811S
Premium (Professional Quality)
Item # ASWSCB5811S $143.87
USED ON: Drill Press, Cordless Drills, Angle Grinders

Add to Basket - BUY ONE NOW

Model 58MF

Water Swivel Adopter - Model 58MF

Premium (Professional Quality)

Item # AWSCB5811TF $139.81

Thread: 5/8"-11" Male/Female x Shank diameter: 1/2"

USED ON: Angle Grinders/Hand Held Grinders/Hand Held Drills. Find out more >>>

Add to Basket - BUY ONE NOW

What you should know before you buy your next diamond drill?

TOTAL DRILLING SOLUTION- Home Page

Universal Metal Bond Core Drills Electroplated Core Drills Thin Wall Metal Bond Core Drills Drilling Accessories

UKAM Industrial Superhard Tools Division of LEL Diamond Tools International, Inc.

28231 Avenue Crocker, Unit 80 Valencia, CA 91355 Phone: (661) 257-2288 Fax: (661) 257-3833

e-mail: lel@ukam.com

© Copyright 2002-2006. UKAM Industrial Superhard Tools. No portion of this web page or its design, images, logos, may be reproduced in any form without written permission from UKAM Industrial Superhard Tools.