Leading Ultra Thin Diamond Blade Manufacturer

Search By

Diamond Blade Type

Material Being Cut


Equipment Used On

Precision Saws

Blade Accessories

Select Right Blade for your Application

How to Property Use Diamond Blades 

Diamond Blade Guide

How to Properly Use Diamond Tools

Troubleshooting Sawing Problems

Application Data Sheet

Other Products
Diamond Blades 
Dicing Blades
Wafering Blades
Diamond Drills
Diamond Wheels
Band Saw Blades  
Other Diamond Products   
Diamond Tool Accessories  
Diamond Machining Equipment
Diamond Slicing 
Diamond Dicing   
Drilling & Micro Drilling
Diamond Machining
Consulting, Process Development
About Us   
What We Offer 
Research & Development 
Custom Manufacturing
Contact Us
What's New
Social Responsibility
Sintered (Metal Bond)
Electroplating / Diamond Deposition

Recommend Us

to Friend/Colleague
Main Catalog (50 pages) 2.0MB
Getting the Most from your Diamond Tools (171kb)
Getting the Most from your Diamond Sawing Operation (125kb)
Select the Right Diamond Blade for your Application (151kb)
SMART CUT™ technology (761kb)
HYBRID Diamond Bond
Get Adobe Reader

Porcelain Diamond Blades METAL BOND - SMART CUT™

Porcelain Diamond Blade (Premium Quality)

SMART CUTPorcelain Blades provide unmatched performance on a very wide variety of ultra hard materials. These are the "REAL" Porcelain blades that are used around the world in most demanding & challenging applications. Designed for industry & users who understand and appreciate quality. SMART CUTPorcelain Blades are preferred choice of Leading Porcelain & Ultra Hard Material Fabricators. You will appreciate their aggressiveness, fast cutting capability, yet still be surprised by the smooth finish they leave behind. Manufactured utilizing SMART CUT™ technology, these blades will provide for you truly superior level of performance, unavailable from other blades. As well as consistent results you can count on everyday.  FREE Advice / Consultation >>>

+ Granite      + Porcelain / Tile
+ Marble       + Glass
+ Stone        + Very Hard Materials
+ Ceramic     + and other materials

Saws Used On:

+ Tile Saw
+ Stone Saw
+ Precision Saws   

Join our mailing list to receive helpful cutting tips, information on FREE products, incredible offers




How to Order - Terms/ConditionsBasket Contents  -  Check Out

Item No. Diameter Rim Width Rim Depth Arbor Size PRICE Internet  Price PURCHASE


10" (250mm)



1"-5/8" B





12" (300mm)



1"-5/8" B





14" (350mm)







DM: Diamond Knock out Arbor  -  B: Bush Ring  -  RPM: Maximum Safe Speed

Maximum Blade Cutting Depths and Operating Speeds

Blade Diameter           Cutting Depth            Recommended RPM           Maximum Safe RPM

       6"                              1-3/4"                            6,048                                10,185

       7"                               2-1/4"                           5,184                                 8,730

       8"                               2-3/4"                           4,536                                 7,640

       9"                               3-1/4"                           4,032                                 6,790

       10"                             3-3/4"                           3,629                                 6,115 

Note: Diamond Blade cutting depths vary with Blade diameter, saw type, blade flanges.

* Based on 9.500 SFPM (Surface Feet Per Minute)

  • For stone and tile, the optimum performance speed is 10-25% less than the speed shown above in the table

  • For most tools, blade shaft speed will be higher than the recommended operating speed shown (aove) in the table (RPM's at no load)

  • The actual blade shaft speed or the tool will slow down under load and usually should fall within the optimum speed range

** The maximum safe speed RPM (in revolutions per minute) each blade can be used

  • Make sure before using any blade: shaft (arbor) of the blade or the tool is within the "maximum safe" speed limit

Water Cooled

  • Keeping your diamond blade cool, will extend life and improve performance, reduce dusty, remove cutting

  • Wet cutting diamond blades must be used with a continuous water flow to prevent heat build up, damage and hazard during cutting

  • Check saw or tool before using a wet cutting diamond blade

  • Make sure it is safe to use the saw or tool with water.

In 1998 UKAM Industrial Superhard Tools,  Division of LEL Diamond Tools International, Inc.  introduced  a  new  breakthrough: SMART CUT  technology  in  manufacturing  precision diamond blades. This  technology  allows  us  to  properly  position  and  orient  the  diamond  inside  the  metal  matrix. Making  sure  every  diamond  is  in  the  right  place  and  at  the  right  time,  working  where  you  need  it  most. (Please,  see  diagram ….)

 maximum cutting performance – each  diamond  works  like  a  small  work  horse. Diamonds  come  in  contact  with  the  material  in  the  right  place  and  at  the  right  time,  working  where  you  need  them  most. You  get  the  maximum  use  out  of  diamond  and  bond. Some unique benefits & advantages of SMART CUT™ technology:

 no glazing – requires minimal dressing, the bond renews itself

 faster cutting action - Diamond blades manufactured utilizing this technology are much more aggressive than your conventional blades. They cut faster, still leaving behind a smooth finish.

 more universal & longer lasting - These diamond blades are designed to work on virtually any material you can find. You can cut very hard materials, than switch to cutting very soft materials and the blade will maintain the same consistent performance. 7mm diamond depth allows the blade to last 80% to 40% longer on the hardest materials

 superior coolant system - these blades are designed to cut with or without oil. We feel it is more preferable to the user to use water as a coolant. Oil does not a proper coolant for this procedure, as most other manufacturers would suggest. Water is a true organic coolant, witch does not leave the material being cut oily or greasy.

What you should know before you buy your next diamond blade?




UKAM Industrial Superhard Tools  Division of LEL Diamond Tools International, Inc.

28231 Avenue Crocker, Unit 80  Valencia, CA 91355  Phone: (661) 257-2288  Fax: (661) 257-3833

e-mail: lel@ukam.com

©  Copyright 2002-2005.  UKAM Industrial Superhard Tools. No portion of this web page or its design, images, logos, may be reproduced in any form without written permission from UKAM Industrial Superhard Tools.