|
|
|
|
Company
|
DIAMOND LAPS UKAM Industrial Superhard Tools manufactures & offers a large variety of diamond laps & polishing discs. Below you will find information, specifications & prices on all laps & polishing discs we offer for this application. Contact us for volume pricing. We can also produce any custom diamond wheel per your specification. Contact us Today for Free Quote!.
METAL BOND DIAMOND DISCS
SMART CUT™ Diamond Toppers are produced with the highest quality diamond and raw material. Simply apply to top of any master backing plate. Each Topper comes with a pressure-sensitive adhesive backing
METAL BOND DIAMOND DISCS (electroplated) with Aluminum Backing
SMART CUT™ Diamond discs are used for a wide variety of applications, including rough and fine grinding of lapidary work where precision is required. A controlled concentration of diamond bonded onto a precision 3/8” thick aluminum backing plate, ensures consistent grinding and surface finishes. Available in a wide range of mesh sizes. All disc have a standard 1/2” arbor hole. Solid Steel Diamond Laps are sturdy precision ground diamond plated laps. These laps are extremely durable and recommended only for commercial faceting machines.
CHANNEL / RIPPLE DIAMOND DISCS (electroplated) with aluminum backing
SMART CUT™ channel / ripple diamond discs have a textured surface which allows for more contact of the diamond surface since debris is whisked away through the channels. These laps come standard with a pre attached aluminum master lap.
No Hole Laps are full faced diamond discs
SMART CUT™ No Hole Laps are full faced diamond discs. They are backed with a 6" master lap that has a 1/4"-20 screw. These laps are used in conjunction with the CabKing unit as endpieces for grinding flats on cabochons. They can also be used on the appropriate horizontal cabbing and lapping units.
BULL'S EYE LAPS
SMART CUT™
Bull's-Eye
Laps are an excellent choice for applications that do not need a lot of
grinding or polishing surface area. If you are using laps just for
grinding small stones these will suit you fine.
MASTER LAPS
SMART CUT™ Master Lap is a precision ground 8m thick high grade aluminum disc. Lower quality backing plates will cause your machines to vibrate. These aluminum bases are the most precise in the industry. This lap is used primarily as a base for the diamond laps.
COPPER LAPS
SMART CUT™ Copper Lap. Copper laps are affordable, high quality discs used to polish all kinds of stone. They are 1/8" copper with 1/4" aluminum base. Simply charge the lap with diamond paste or diamond powder and begin polishing. These laps do not need to be scored.
CERAMIC LAP
SMART CUT™ Ceramic Lap affordable, high quality discs used to polish hard stones like sapphire.
|
|
What
you should know before
you buy your next
diamond wheel? 
|
UKAM Industrial Superhard Tools Division of LEL Diamond Tools International, Inc. 28231 Avenue Crocker, Unit 80 Valencia, CA 91355 Phone: (661) 257-2288 Fax: (661) 257-3833 e-mail: lel@ukam.com |
|||||||||||||
|
|
|
||||||||||||
