Small Diamond Lapping Machine 

8" and 6" Lapping Machine with 45 degree slant This lapping machine is used for lapping and polishing of large pieces of material. Its large surface area makes this process fast & easy

Other Lapping & Polishing Products:  Diamond Laps  -  Pre-Polishing Discs  -  Pre-Polishing Strips  -  Polishing Discs  -  Lapping Equipment

FREE Advice / Consultation >>>

ADVANTAGES: Fast Material Removal Minimum heat generation Clean & Inexpensive process Very thin material can be processed to precision tolerance.

INDUSTRIES USED IN: Automotive / Diesel Aerospace Compressor & Valve Pumps Tool & Die Bearings Precision Optics Precious & Semi Precious Stone

Technical Ceramics Data Storage Semiconductor Medical Devices Specially Materials / Products Mechanical Seals Composites Glass Stone Metallography

Made in U.S.A.

As a essential part of finishing process, SMART CUT™ Lapping, Grinding, & Polishing machines / equipment play a major role in establishing the final dimensional and surface characteristics for many industrial parts. Lapping operation is used for many work materials including glass, ceramic, plastic, metals and their alloys, sintered materials, stellite, ferrite, copper, cast iron, steel etc.

Lapping is primarily considered to be a three-body abrasive mechanism due to the fact that it uses free abrasive grains that can roll or slide between the work piece surface and the lapping plate, although some grains become embedded in the lap leading to two-body abrasion. Lapping is a loose abrasive machining process that combines abrasive particles within an oil or aqueous medium depending on the material being finished. Fine abrasive is applied, continuously or at specific intervals, to a work surface to form an abrasive film between the lapping plate and the parts to be lapped. 

Each abrasive grain used for lapping has sharp irregular shapes and when a relative motion is induced and pressure applied, the sharp edges of the grains are forced into the work piece material. Each loose abrasive particle acts as a microscopic cutting tool that either makes an indentation or causes the material to cut away very small particles. Even though the abrasive grains are irregular in size and shape, they are used in large quantities and thus a cutting action takes place continuously over the entire surface in contact.

UKAM Industrial Superhard Tools   Division of LEL Diamond Tools International, Inc.

25345 Avenue Stanford, Unit 211  Valencia, CA 91355  Phone: (661) 257-2288  Fax: (661) 257-3833

e-mail: lel@ukam.com