SELECTING RIGHT LAPIDARY BLADE FOR YOUR APPLICATION
STOP
THROWING YOUR MONEY AWAY!!! SINTERED (METAL BOND) BLADES THE BEST SOLUTION
FOR YOUR APPLICATION
About
Diamond Blades
Simply,
the diamond blade is a cutting tool which has exposed diamond particles captured
in a metal nickel matrix each with a small cutting edge. The number of cutting
edges which is determined by the number of diamonds (or concentration) make up
the structure of the diamond blade, along with its matrix, (metal or nickel
bond). The size of the diamond particle will have a direct result in the size of
chip you get. The thickness of the blade (diamond particle plus matrix) will
determine the width of the cut. Therefore, blade selection along with feed rate,
cutting speed, and depth of cut will ultimately determine the blades success.
Why
use sintered (metal bonded) diamond lapidary blades?
Sintered
(Metal Bonded) Blades
vs.
Electroplated Diamond Blades
Sintered
(metal bonded) blades are the latest technology available in diamond blades. And
represent the best value and performance per cut. They are the best investment
you can make. Although they will cost you more than electroplated blades, metal
bonded blades will more than pay for themselves in terms of:
Longer
Life
Electroplated
blades cost less, and at first glance may seem like the most cost effective
alternative. However, they will cost you more in the long run. Depending on
material and application, metal bonded blades will last significantly more than
100 electroplated diamond blades put together. You can’t get more life out of
any other blade. Instead of constantly putting blades on and off the saw, you
will save money by using one blade. This means cost per cut, metal bond blades
are the best choice.
More
Consistent performance
Electroplated blades have only one layer of diamond coated on metal core. Diamonds lie only on the surface. When a this diamond portion is peeled off, the blade will slow down, cut on the side (not cut straight) or stop working altogether. Metal bonded blades are sintered and impregnated inside the metal matrix. Multiple layers of diamonds are impregnated inside the metal matrix. Unlike electroplated blades, metal bond blades wear evenly, and are known for their consistency. You will get consistent cutting speed, and overall performance from sintered (metal bonded) blades.
SMART CUT Metal Bonded Blades VS. Conventional Metal Bonded Blades
Talk to an engineer
PRODUCTS
SMART CUT technology - Precision Diamond Lapidary Blades - Slabing Blades - General Purpose Blades - Diamond Core Drills - Water Swivel Adopters - Drilling Accessories
SUPPORT
Selecting Right Blade - Research & Development - Troubleshooting - Usage Instructions
ABOUT US
Company - What We Offer - References - News - Events - Distributors
SHOP
Web Catalog - Lapidary Blade Specials - Custom Diamond Tool Manufacturing - How to Order - Terms & Conditions
CONTACT US
Request Information - Visit Us - Recommend Us