MONSTER I Diamond Blades - SMART CUT™ technology
Highlighted in yellow are stock items.
Maximum Blade Cutting Depths and Operating Speeds
Blade Diameter Cutting Depth Recommended RPM Maximum Safe RPM
6" 1-3/4" 6,048 10,185
7" 2-1/4" 5,184 8,730
8" 2-3/4" 4,536 7,640
9" 3-1/4" 4,032 6,790
10" 3-3/4" 3,629 6,115
Note: Diamond Blade cutting depths vary with Blade diameter, saw type, blade flanges.
* Based on 9.500 SFPM (Surface Feet Per Minute)
** The maximum safe speed RPM (in revolutions per minute) each blade can be used
Precision Diamond Blade by itself is perhaps the most important factor in your precision diamond sawing operation. The diamonds impregnated inside the bond matrix of the diamond blade, are what actually participate in cutting action. No matter how precision or well made your saw. You will not be able to obtain the material surface finish, and precision tolerances you need, if the blade you are using is not right for your application. UKAM Industrial Superhard Tools proprietary blade chemistry, precision manufacturing methods, modern quality control methods, allow us to control and regulate the dozens of variables that affect blade life, quality of cut, surface finish. Reducing and often eliminating additional steps often required after cutting. All blades are manufactured and available from inventory to fit your specific material, application, and surface finish requirements. We will work with you to determine your needs, and develop the right bond formulation, concentration, and grit sizes. SMART CUT ™ Precision Diamond Blades are designed and specially selected to provide maximum possible blade life, for your desired cut quality and speed.
UKAM Industrial Superhard Tools is one of the Leading Diamond Precision Blade Manufacturers, with one of the Largest Inventory of Precision Diamond Blades in the U.S. Over 4,000 Precision & Ultra Thin diamond blades in stock, available in different sizes, thickness, arbor sizes, diamond concentrations, diamond mesh sizes, and bond hardness's.
You are sure to find the Right Precision Diamond Blade for your application in stock and ready for same day delivery. If you are not using these blades, you are paying too much.
In 1998 UKAM Industrial Superhard Tools, Division of LEL Diamond Tools International, Inc. introduced a new breakthrough: SMART CUT™ technology in manufacturing precision diamond blades. This technology allows us to properly position and orient the diamond inside the metal matrix. Making sure every diamond is in the right place and at the right time, working where you need it most. (Please, see diagram ….)
maximum cutting performance – each diamond works like a small work horse. Diamonds come in contact with the material in the right place and at the right time, working where you need them most. You get the maximum use out of diamond and bond. Some unique benefits & advantages of SMART CUT™ technology:
no glazing – requires minimal dressing, the bond renews itself
faster cutting action - Diamond blades manufactured utilizing this technology are much more aggressive than your conventional blades. They cut faster, still leaving behind a smooth finish.
more universal & longer lasting - These diamond blades are designed to work on virtually any material you can find. You can cut very hard materials, than switch to cutting very soft materials and the blade will maintain the same consistent performance. 7mm diamond depth allows the blade to last 80% to 40% longer on the hardest materials
superior coolant system - these blades are designed to cut with or without oil. We feel it is more preferable to the user to use water as a coolant. Oil does not a proper coolant for this procedure, as most other manufacturers would suggest. Water is a true organic coolant, witch does not leave the material being cut oily or greasy.
What you should know before you buy your next diamond blade?
UKAM Industrial Superhard Tools Division of LEL Diamond Tools International, Inc.
28231 Avenue Crocker, Unit 80 Valencia, CA 91355 Phone: (661) 257-2288 Fax: (661) 257-3833
© Copyright 2002-2005 UKAM Industrial Superhard Tools. No portion of this web page or its design, images, logos, may be reproduced in any form without written permission from UKAM Industrial Superhard Tools.