TROUBLE SHOOTING

We are here to help you get the most out of your diamond lapidary blade investment. If you have a problem, have a question, need further guidance or assistance please contact us at Phone: (661) 257-2288. Our experienced engineers will provide valuable suggestions on how to improve you diamond machining operation. We encourage you to provide as much information as possible on your application and periodically update us on the diamond tool progress.  

 

                   Common Problems                          Solution/Prevention                          
Material Overheating

 

Not enough coolant. Power water supply. Increase amount of coolant
Material/Saw Vibration

 

Small flange diameter is the largest cause of blade vibration.

  • Change Blade Tension

  • Slow Down Feed Rate

  • Check saw shaft, it may be worn out

  • Check Flange Tightness, lack of tightness causes vibration

  • Make sure you saw does not vibrate

  • Make sure your table does not vibrate

  • Make sure your table is set up perpendicularly

  • When blade speed slows down, proceed to dress

For further blades usage suggestions & recommendations, download: Getting the most out of your Diamond Lapidary Blade Guide.

   To with an Engineer

PRODUCTS

SMART CUT technology  -  Precision Diamond Lapidary Blades  -  Slabing Blades  -  General Purpose Blades  -  Diamond Core Drills  -  Water Swivel Adopters  -  Drilling Accessories

SUPPORT

Selecting Right Blade  -  Research & Development  -  Troubleshooting  -  Usage Instructions

ABOUT US

Company  -  What We Offer  -  References  -  News  -  Events  -  Distributors

SHOP

Web Catalog  -  Lapidary Blade Specials  -  Custom Diamond Tool Manufacturing  -  How to Order  -  Terms & Conditions

CONTACT US

Request Information  -  Visit Us  -  Recommend Us

UKAM Industrial Superhard Tools  Division of LEL Diamond Tools International, Inc.

25345 Avenue Stanford, Unit 211  Valencia, CA 91355  Phone:(661) 257-2288  Fax: (661) 257-3833

e-mail: lel@ukam.com