FIND LAPIDARY DEALERS & DISTRIBUTORS

UKAM Industrial Superhard Tools maintains a worldwide distribution channel. We work closely with our distributors to optimize and improve your lapidary machining process. Whether its custom engineering a diamond diamond tool for your application or selecting the right diamond for your application, you can rely on our distributors. To Find the distributor nearest you, fill out the application below. 

You will be contacted by a distributor or UKAM Industrial Superhard Tools representative that most closely fits your application / material.  

In 1998 UKAM Industrial Superhard Tools,  Division of LEL Diamond Tools International, Inc.  introduced  a  new  breakthrough: SMART CUT™  technology  in  manufacturing  precision diamond blades. This  technology  allows  us  to  properly  position  and  orient  the  diamond  inside  the  metal  matrix. Making  sure  every  diamond  is  in  the  right  place  and  at  the  right  time,  working  where  you  need  it  most. (Please,  see  diagram ….)

 maximum cutting performance – each  diamond  works  like  a  small  work  horse. Diamonds  come  in  contact  with  the  material  in  the  right  place  and  at  the  right  time,  working  where  you  need  them  most. You  get  the  maximum  use  out  of  diamond  and  bond. Some unique benefits & advantages of SMART CUT™ technology:

 no glazing – requires minimal dressing, the bond renews itself

 faster cutting action - Diamond blades manufactured utilizing this technology are much more aggressive than your conventional blades. They cut faster, still leaving behind a smooth finish.

 more universal & longer lasting - These diamond blades are designed to work on virtually any material you can find. You can cut very hard materials, than switch to cutting very soft materials and the blade will maintain the same consistent performance. 7mm diamond depth allows the blade to last 80% to 40% longer on the hardest materials

 superior coolant system - these blades are designed to cut with or without oil. We feel it is more preferable to the user to use water as a coolant. Oil does not a proper coolant for this procedure, as most other manufacturers would suggest. Water is a true organic coolant, witch does not leave the material being cut oily or greasy.

UKAM Industrial Superhard Tools   Division of LEL Diamond Tools International, Inc.

25345 Avenue Stanford, Unit 211  Valencia, CA 91355  Phone: (661) 257-2288  Fax: (661) 257-3833

e-mail: lel@ukam.com