|
|
Diamond Gang Saw Model
2491
FREE
Advice
/ Consultation >>>
SPECIFICATIONS
|
Maximum uncut tube length:
|
24.0" +/- 0.25"
|
| Minimum
cut length: |
0.050"
|
| Maximum
tube diameter: |
0.40"
|
| Minimum
tube diameter: |
0.030"
|
| Production
rate: |
|
| Loading
System: |
Hopper Fed. Manual
Loading. 30 min cap.
|
| Unloading
System: |
Gravity Discharge.
Custom interfaces available.
|
| Cutting
Wheels: |
3.0" x .020" x
1-5/8" Diamond Cutoff
|
| Dimensions: |
60" x 33" x
48" (L x W x H)
|
| Weight: |
1500 lbs
|
| Power: |
220/480 3Ph VAC, 30A
|
| Coolant: |
Water @ 10gpm, additive
optional
|
| Air: |
90 psi, <1.0 scfm
|
|
Features:
Uncut
tubes are loaded into a hopper, the transported automatically between
the feed roller and holding sheet. Multiple cutting wheels
pass through slots in the holding sheet and cut each tube. This assures
that the cutting action is always from the outside of each tube toward
its center. This minimizes chipping or burring of the cut parts.
|
Made in U.S.A.
|
|
SMART
CUT™
Expect
MORE
from your tools.
|
Advantages:
-
NO
POTTING REQUIRED!
-
Production
rates range from 400 to 6000 parts per minute
-
Multi-Blade
cutting system makes all cuts simultaneously and automatically
separates end cuts from finished pieces.
-
Capable of
cutting tubes or rods of glass, quartz, carbon, ceramics, plastics,
fibre glass, hybrid and exotic materials and most metals. If
it is a rod or a tube it can be cut on this system!
-
Simple,
hopper fed operation allows one person to operate multiple machines.
-
Normal
length tolerance is +/- .002". Squareness is +/- 1.0 degrees.
-
Stock
material diameters currently range from 0.030" to 3.0".
-
Uses water
as a coolant. Can also use additives and lubricants as desired
|
|
|
