|
Leading
Diamond Drill Manufacturer |
|
|
Diamond Core Bits / Drill Bits for Concrete
& Allied Materials (wet only) 
Super Premium Quality
DRILL
ALL TYPES OF CONCRETE AND ALLIED MATERIALS FAST & EASY
|
|
Specially
formulated professional quality segments provide fast cutting and long
life in a variety of materials including concrete, reinforced concrete,
brick, block and masonry. Full range of sizes for virtually any job. Use
on core drilling machines and hand-held drills.
|
APPLICATION
|
|
|
|
|
|
Designed
for Concrete with light to moderate reinforcement, Masonry, Block
and Brick.
|
|
Use
wet only
|
|
APPLICATION/TESTING
EXAMPLE:
 
|
APPLICATION/TESTING
EXAMPLE: We have tested these diamond
core bit by drill into a 12" thick test slab of 5,000 psi cure concrete
with four 5/8" rebar placed in the line of a cut. An rpm of 800 was used
during this test. The time
to drill a hole that included rebar was 5 minutes and 15 seconds. Without the
rebar drilling time was only 3 minutes and 45 seconds.
Concrete
& Allied Material Drill Guide / Case Studies >>> |
|
|
|
APPLICATION: (materials used on)
   
   
  
Designed for drilling most types of ultra hard to soft materials
|
ADVANTAGES:
-
LONGER
LASTING
-
FAST
DRILLING
-
Manufactured
with SMART
CUT™
technology
-
Best
Performance & Value for your money
-
Super Long Life /
Consistent Performance
-
Works on
large variety of concrete, allied,
& ultra hard materials
-
More
Aggressive
-
Smoother
Finish
-
Easy
to Use
-
Works
on all Popular Drilling Equipment
|
SMART
CUT™ technology
Find
out more...
Please contact
us for INCREDIBLE QUANTITY DISCOUNTS!!! |
How to Order
- Terms/Conditions -
Basket
Contents - Check
Out
|
Diamond
Core Bit Speed Recommendations
please note these are general guidelines. For specific application
recommendations, please contact our technical support team.
|
| Wet
Bit Diameter |
Max/Min
RPM* |
| 1" - 2" |
(25mm - 51mm) |
1,200 - 1,000 |
| 2-1/4 " - 5" |
(57mm - 127mm) |
1,000 - 500 |
| 5-1/4" - 12" |
(134mm - 305mm) |
500 - 250 |
|
*
Based upon the Optimum Performance Speed
calibrated in Surface feet per Minute (SFM).
|
-
All prices are in USD (United States Dollars)
-
Quantity Discounts are available. Please, contact a representative at
Phone: (661) 257-2288
-
Prices are F.O.B. Valencia, CA U.S.A.
-
Other Core Bit
Sizes & Drilling Depths are available upon request
-
Different Drilling
Depths are available upon request
-
Custom Core Bits
can be made to your specifications to better fit your specific material,
application, and operating conditions.
|
|
Diamond
Core Bit Variables affecting Bit Life & Performance
|
Diamond
Core Bit Characteristics
|
Core
Bit Life
|
Drilling
Speed
|
|
Core
Bit Bond Hardness
|
Softer
|
Shorter
|
Faster
|
|
Harder
|
Longer
|
Slower
|
|
Diamond
Quality
|
Lower
|
Shorter
|
Slower
|
|
Higher
|
Longer
|
Faster
|
|
Diamond
Concentration
|
Lower
|
Shorter
|
Slower
|
|
Higher
|
Longer
|
Faster
|
|
Segment
Thickness
|
Thinner
|
Shorter
|
Faster
|
|
Thicker
|
Longer
|
Slower
|
|
Application Variables
affecting Diamond Core Bit Specification Selection & Performance
|
The
Job
|
Core
Bit Life
|
Drilling
Speed
|
|
Drilling
Depth
|
Shallow
|
Usually
Shorter
|
Faster
|
|
Deep
|
Usually
Longer
|
Slower
|
|
Drilling
Pressure
|
Lower
|
Longer
|
Slower
|
|
Higher
|
Shorter
|
Faster
|
|
Abrasiveness
of Material
|
More
|
Shorter
|
Faster
|
|
Less
|
Longer
|
Slower
|
|
Material
Harness
|
Harder
|
Shorter
|
Slower
|
|
Softer
|
Longer
|
Faster
|
|
Aggregate
Size
|
Larger
|
Shorter
|
Slower
|
|
Smaller
|
Longer
|
Faster
|
|
 |
DIAMOND
CORE BIT ADAPTERS
|
A
- Adapter from 1-1/4-7" Female Thread to 5/8-11" Female Thread (longer
version for drilling rigs)
B
- Adapter from 1-1/4-7" Female Thread to 5/8-11" Female Thread
(shorter version for angle grinders/hand held drills)
C
- Adapter from 5/8-11" Female Thread to 1-1/4-7" Female Thread
|
